1994 Land Rover Discovery "landrover 3" Questions

...head bolt torque settings for 200 landrover discovery 4.0 liter 241 cu.in. Need head bolt torque settings for 2000 landrover discovery 4.0 liter Stage 1 20nm Stage 2 +90 degrees Stage 3 +90 ...

...Landrover 200tdi, G - S reg,1989-1998 it goes as follows, Stage 1:- Tighten all bolts to 30lb ft or 40Nm then Stage 2:- Angle tighten a further 60 degrees then Stage 3:- Angle tighten a further 60 ...

cam belt landrover discovery 3 email me at [email protected] and include the year of the car.

Landrover Discovery 3, what do you call the rear door stop, ie the device that stop the door from opening to far and damaging the body work. its called the door stop as you listed.

...Landrover talked me through how to deploy the emergency release cable (it's a small wire cable that sits under the removable cover directly behind and beneath the handbrake switch- just remove the ...

...landrover discovery 1 leaking oil you can drill out the rivets and put bolts in it , usually you can drill the 3 of them in the car,,and thats enough to stop them . you may need needle nosed ...

3 not working. Landrover Dealer can't find fault. Replaced reciever, still not working. Absolutely no connection between both keys and car. Keys re-programmed, still not working? Central locking using

...landrover v8 engine 3.9l i need to know the firing order when tunning the engine Jeffery is exactly opposite to the facts. The cylinders are numbered standing in front of the engine left bank front ...

...landrover discovery 3 will not go into low gear and the amber warning light on the parking brake as come on plus the small screen which tells you what gear you are in goes not work The problem with ...

...landrover discovery 3 2005 more regular when i start it it looks like it is letting exhaust fumes out from the front of the car it happens for a few seconds then stops can anyone help, thanks If the ...