2004 Porsche 911 "gearbox" Questions

Porsche 911 1995 C2 Gearbox Issue Good evening...1995 911 C2. Gearbox issue. Can select all gears with ignition off. As soon as engine fired up unable to select any gear until engine/gearbox warm. ...

gear box G50 i would like to rebuild the gearbox i have all the parts but would like to have instructions on how it is built and what to do is this just to hard a job I would go to pelicanparts.com ...

porsche 996 replaced 3.4 to 3.6 with triptronic gearbox having problems with wiring do i have to change wiring harness or some other way around HELLO SHEENA IM JP , YES YOU WILL NEED TO REPLACE THE ...

...clutch.proporsche You need to get under the car and look for the number on the bottom of the gearbox, it will start with either G50 or G60 and this will give you your

jumping out of first gear in 1986 911 915 gearbox Hi,well i hate to be the one to tell you, but your first gear synchronizer is going out,and trany will have to be removed,and split open to fix it,and

...stuck. Dis-connect the battery. Remove the gear linkages and speedo-drive and power cables from the gearbox. Remove the starter motor. Loosen the propshaft. Mark the yokes of the propshaft- for upon ...

gearbox interchange between cars what other cars or vans will a 2002 2.0 hdi pug 406 gearbox fit 406 comes normally with a gearbox model BE3 of 5 speed (as limited were with 6 speed). As late models ...

I need to top up the gearbox lube Where is the top up valve/bolt for the gearbox? There is a big bolt (19mm?) near/on bottom of gearbox which I would guess is to drain the gearbox. And I am needing to

...on a manual transmission if so how 'Transmission Fluid' in a manual transmission vehicle is called 'gearbox oil'. On the gearbox, there is a drain plug in the bottom somewhere and a fill plug on the ...

inner drive shaft is spinning on gearbox. is it likely to be shaft or gearbox. if gearbox do they just supply part that shaft fits on to. You may have torn the splinds on the drive shaft at the ...