1990 Porsche 928 "flexplate bolts torque" Questions

Ad

Question about Porsche 928

1 Answer

flexplate bolts are torque-to-yield which means they are prestreched from the factory. If you take them off you MUST buy new ones. If the new ones don't come with Locktite or simular bolt lock you

Ad

...What could that be Loose flywheel or torque mount bolts It could simply be loose fasteners that hold the torque converter to the flexplate (flywheel) or possibly a cracked flexplate. Hope this

Ad

BOLTS AROUND THE CRANK BREAK THE FLEXPLATE. WHAT CAN BE CAUSING IT. G'day mate , misallignment, make sure the bell housing is in good clean servicable condition also when the box is out check that the

Question about Porsche 928

1 Answer

...the flywheel from the torque converter on a 2001 Tiburon? Torque converters are bolted up to the flywheel or flexplate. Probably 4 or 6 bolts from the flywheel engine side into the torque

...into position to engine while aligning the holes in the flexplate to the bolts in the torque converter. Once alignment, secure the transmission to the engine. Then tighten the converter nuts and ...

...connect the flywheel to the crankshaft If it has an automatic transmission the flexplate or flywheel has 6 bolts to connect it to the crankshaft and 4 more bolts to connect to the torque ...

Question about Porsche 928

1 Answer

...2whl dr 1988 GMC jimmy. does the torque converter bolt to the flywheel. You'll have to remove the torque converter to flexplate bolts and push the converter back a little when you pull the trans.

Question about Cars & Trucks

1 Answer

...Bolts or Parts Lube or Sealer Torque to: Valve Cover Engine Oil 3 ft-lbs. Exhaust Manifold Anti-Seize Lubricant 25 ft-lbs. Spark Plugs No Lube or Sealer 20 ft-lbs. Flexplate (Automatic) Flywheel ...

...flexplate is hooved out in the center where it bolts up to the end of the crankshaft. I don't know if that side should be toward the crank or the torque converter the dish in the center of the ...

Question about Porsche 928

1 Answer

...flexplate i cut belt off smogpump could this b related grinding with car in park n gets worse when u starty moving Auto or manual? Sounds like the either the torque converter bolts have come loose or ...

Not finding what you are looking for?
1990 Porsche 928 Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Porsche Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Porsche Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...