1986 Porsche 944 "3 clutch" Questions

clutch pedal is to the floor, there are about 3 different things that could be wrong. First check brake fluid to make sure full, see if there is any leakage under steering wheel and below transmission

...clutch and it ran well for 3 miles until I came to a light and did the sputtering and died. Had it towed and came back a few days later. Nothing happens when I turn key. No lights nothing. Can you ...

...clutch replacement, I assumed that you see the fan turn before the electric fan kicked in. B- Do you lose a lot of water? C-Do you open the oil cap to observe the milky stuff as a result of moisture ...

...has a hydraulic system.If it is a cable clutch, adjust cable. 2. Air in the system. Bleed out the slave cylinder to make sure there is no air in the lines. 3. Clutch needs to be replaced. Good

...the clutch out while in neutral. Wait a second, then push in the clutch and put in 3 and let the clutch out. This is how transmissions in old trucks without syncronisers are shifted. Hope this ...

...3 clutch won't engage gears seem to shift but clutch doesn't engage. Engine revs slightly and car surges slightly but won't move. Problem came up in 1 day. relpace the clutch pressure plate and ...

...clutch is not just the thing you smell when riding the clutch, it comprises of 3 main components. 1. Release bearing.... 2. Pressure plate... 3. Clutch (frictioin) plate... I hope this ...

clutch grabs 3/4 of the way up and I start to move but my engine revs as if i'm in neutral i nee to play with the throttle to keep my rpm's down would this be a clutch or cable problem? It sounds like

...2-- cable is jamming in the case---replace clutch cable 3--- there is oil /grease on the clutch plate and flywheel and pressure plate facings check for signs of oil at the bottom of the bell ...

for the hydraulic clutch? 2.) where is it located 3.) Is there a way to bench test the transmission mounted clutch slave cylinder? Thank you for your help. the clutch and brake resevoir are all in one