1997 Jaguar XJ6 "release spring clip back" Questions

...spring. 13- Remove filler housing bolts. 14- Displace filler housing from body opening 15- Remove fuel tank. 16- Remove hose from evaporative loss flange and filler neck , ( Bend weld tag upwards to ...

release the spring clip. two clips from the back of the headlamp hold it in the twist one way or another, the headlamp assembly will slide out through the front. Dont be fooled it is a PAIN. Good Luck

...release the lower end of the spring clip, look closely and you'll see the latch holding it. You have to press it towards the front of the car and swing it towards the passenger side. It will swing up ...

...release the large spring the keeps the latch closed. Just pull the little steel ball back behind the clip, voila'. The real trick was reaching up to stick a screwdriver in that hole to release the ...

...is held down by spring wire clips. Just push in on them really hard and the seat will release. Run a screwdriver under seat to locate the spring clips. The seat back just unbolts and lifts up and

back of the overhead console with 1/4 turn bulb holders. the overhead console ( non rail version ) is held up with spring clips. Open the rear compartment, and grab the rear corners and pull down 1 at

...of the console and pull down. The console is held up with spring clips, and the 1st time can take a good tug to get the spring clips to release. The bulbs are 1/4 turn bulb holders from the

...release the spring clips on the front ( towards the inside of the cab ). Just pop the spring clips up, do not lift too high, else the tabs on the back will break. Once both spring clips are removed, ...

...spring clamp to release. They are awkward to unclip. Use a small mirror and torch to look closely at the back to see how the clip sits in. You have to flex it to release it. Be carefull that once it ...

spring clip retainer release tools, they are "U" shaped and have a little ball on the open end of the U, they go through the 2 little holes on each side of the radio face plate, and release the clips,