Hyundai Motor 2003 Elantra "heater vent control cable" Questions

heater/ac flow controller from my 03 elantra. the air only blows thru the front vents and it seems like the switch is bad are u convinced it is a controller issue as this is rare on that vehicale i am

heater door does not go between vents Vent door does not move between selections on dash switch stays on vents only.. I realize there are a few fixes but anybody else have this issue or dealt with it.

...heater/air conditioner fan diverter on my 2003 Elantra doesn't work. It only blows air from the bottom, not the A/C vents or the defroster. Advice? Either the "MODE" control cable has come loose from ...

...vent selector cable defrost? The cable end broke(by mistake) whilst changing the bulbs to illuminate the panel. buy one and install it. it has clamps remove them or unsnap them and ..... access? its ...

...Heater Vent Control Hi there. I have a 2008 Ford Escape and the heater will only blow hot air out of the front dash vents. We cannot get air to blow out of the floor or defrost vents. The control ...

...heater to change from the vent ( in the face) to defrost or any other control Check the heater door linkage and cable adjustments. If you have the "pushbutton" type heater control unit then this that ...

...heater vent controls There is a cable that wraps around the vent control knob in my 2010 corolla. This cable is what allows you to switch between where the AC/heater blows. If I could find a ...

...heater vents, and driver side lower vent blowing plenty of warm air. Passenger side lower vent blows only cold; as in outside air temp cold. Craziest thing. Any ideas? Thanks. Its just a vent damper ...

...only blows out the dash vents. sounds like a heater control cable has come off, try looking under dash by the passenger side (may need to remove some trim)and see if you can see any control

...vent control lever. Remove the center panel, radio and heater control head. Remove the gauge upper panel (4-door) or instrument panel (3-door). Disconnect the speedometer cable. Remove the center ...