Hyundai Motor 2003 Elantra "car battery" Questions

...battery, car off. it should read at least 13 volts. with it running at battery should be about 14-14.2 volts. if the alternator does not put out 14-14.2 volts then thats your problem, unless you have ...

...car sits happened 3 times took to auto shop they said computer had no record of any problem check battery.if you have a delco maintenance free battery make sure the eye in it is green if not replace ...

...car run for awhile to recharge the battery 3. remove the battery, some parts stores offer free 2 hour quick charge for free (autozone ), and u can have them test the battery to see what kind of shape ...

car was left Get the battery charged outside the car. You can get it checked and charged free at AutoZone and other shops. Several cars lately have had the same symptoms, and the problem turned out to

...car.If the headlights do not dim or go out, then the battery is likely ok. ·Check the starter and solenoid: If the wiring looks ok, then look at the starter solenoid for a good connection, and proper ...

...battery once. Car was running fine went to get gas car wouldn't start. Was able to get it jumped got it home and wouldn't start. Took the battery to get checked and have it charged now. my battery ...

...replace your car battery? Is it unsafe to make a trip with low battery? Where can one find the best rates for purchasing and replacing a car battery for a Hyundai Electra? Discuss that at a repair ...

...battery in car is older than 4 years old, this should be only thing to replace. If the vehicle runs either by replacing the battery, or jump starting, and dies soon after or within a few days, then ...

...battery in my Car is flat and I want to take it out and change it for a new battery but after disconnexting the +ve and -ve terminals I still can't get the battery out. How do I get the old battery ...

...battery from its place. Can you please helpl me - totally ignorant when it comes to car mechanics (as evidenced by my question). Thank you. You need to remove the plastice shield, (3 plastic screws ...