1998 Saturn SL "turn cooling fans switch" Questions

cooling fan not running checked fuse ok wiring connected and ok fan free turns free I would check the fan first disconnect the electrical connectors on it and use a pair of home made jumper cables and

...cooling fan not working on a 1999 saturn sl2 run jumper wires to the fan motor to see if they work if they work then try turning on the A/C to max that should also make the fan come on if that works ...

switch. There should be different relays for the AC fav and the cooling fan, even if its the same fan. If you have to you can wire it up directly, so when the ignition is turned on the fan will always

...for the cooling fan to come on or turn off when its needed maybe called a module ? where is it on the car? It is called a coolant temperature switch, usually located on the block. Hope this ...

turn on coolant fan ,A/C compressor ..... Free wiring diagrams here http://www.bbbind.com/free_tsb.html Enter vehicle info. year , make , model an engine size. Under system click on engine ,then under

...switch is on the dashboard. there is a cooling fan for the radiator, there is a temp sensor screwed into the head which turns it on and off. Ok the thermal fan switch is located right up under the ...

...turn the fans back on it will blow out hot air for about 30 seconds and then it cools off. the car runs fine any i see no other problems that would relate to this, anyone have any ideas? sounds like ...

...switch to the fan...? You want to turn it on when you want? -No Problem. Here some basic installation. -Connect the hot wire to the positive (+) battery terminal. -Connect both left over wire to the ...

...fans are turned on by a heat sensitive switch, your engine temperature may not be getting hot enough for it to come on. One way to test it is let the vehicle idle and keep an eye on the temperature ...

...cooling fans(thermal switch),wires and connections. Cooling fan switch problems are often caused by faulty wiring or loose or corroded connections rather than the failure of the switch itself. If the ...