1996 Saturn SL "install drive belt 3" Questions

Ad

...Drive belt, tensioner and pulley Power steering pump attaching bolts and set the pump to the side with the lines still attached A/C compressor from the bracket and set aside with the lines attached ...

Ad

...install the top engine mount,,,close the petcock and put sheild back on,,,,,put wheel well shield back on,,and tires,wheel,,,let jack down off engine,,,let car off jack stand,,,fill with new ...

Ad

...Install drive belt over all pulleys (except drive belt tensioner). Rotate drive belt tensioner as described under the removal procedure and install drive belt over drive belt tensioner pulley. Make ...

...Install the accessory drive belt (2) around all the pulleys except for the generator pulley (3). 2. Using a wrench, rotate accessory drive belt tensioner (8) counterclockwise until accessory drive ...

...drive gear pulley. 2. Install pusher and tighten bolt to the specified torque. Torque : 25 N·m (2.5 Kg·m/18 lb ft) 1. Install the pusher while pushing the tension pulley to the belt. 2. Pull out pin ...

...install the accessory drive belt and release the tensioner. 3. Position the A/C Compressor drive belt over the crankshaft pulley and A/C compressor pulley. 4. Tighten the drive belt tensioner. 5. ...

...the belt. 4.To install the accessory drive belt, on the engine, rotate the accessory drive belt tensioner counterclockwise till the spring clip releases. 5.Install the belt. What engine

Install crankshaft drive pulley. Bolts: 15 ft. lbs. (20 Nm). Adjust drive belt tension and install the thermostat and housing. Bolts: 84 inch lbs. (10 Nm). Fig. Water pump and thermostat housing-2.0L

Question about Saturn SL

1 Answer

...INSTALL DRIVE BELTS a. Install the drive belts. b. Adjust the drive bell with the adjusting bolt. c. Tighten the pivot and adjusting lock bolts. Torque: Pivot bolt: 59 N.m (600 kgf.cm, 43 ft.lbs Lock ...

...Install the A/C drive belt (1) to the engine. 3. Install the power steering gear. 4. Install the power steering cooler to the front crossmember. 5. Install the power steering cooler bolts. ^ Tighten ...

Not finding what you are looking for?
1996 Saturn SL Logo

791 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 Saturn SL
1999 Saturn SL

1,310 Questions

1998 Saturn SL
1998 Saturn SL

953 Questions

2000 Saturn SL
2000 Saturn SL

963 Questions

1997 Saturn SL
1997 Saturn SL

862 Questions

1993 Saturn SL
1993 Saturn SL

85 Questions

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...