...the average result for each test location. The readings should be 50?65 lbs. (22.7?29.2 kg) for new belts or a minimum of 45 lbs. (20.4 kg) for used belts. If the readings are out of this range or do ...
replaceing alternor belt. 2002 saturn Use a 9/16- inch box-end wrench to rotate the tensioner clockwise and release the tension on the belt. Remove the belt and CAREFULLY release the tensioner. Route ...
need a pic of how to put my belt back on I put a new alt in and now i can't get the belt tight. I don't know if the belt is on wrong or the pully is bad? Did you save the old belt or did it break? ...
...e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them. Let me know if this helped, or if you have additional information or ...
...e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on
...also spins the steering pump and the A/C compressor. you need to buy a new belt and install it. the belts have different lengths depending on how the engine is configured. take your old belt to a ...
...melts these rubber areas if ac compressor clutch fails). First, with engine off, check condition of belts. Are they dry & cracked where they ride on pullleys? If so need new belt. Also carefully ...
We need to replace an alternator belt on a 2001 saturn sl2 series YOU MEAN THE CERPENTINE BELT?? IT ONLY HAS ONE I BELIEVE. BELOW THE TOP FRONT ENGINE MOUNT THERES A BELT TENSIONER PUT A WRENCH ON THE
...an issue. They stretch over time and need to be adjusted or replaced. This is normal wear on the belts. Adjust the tension on the belt or replace it as needed and that will be
I have a 2002 saturn sl2. power steering pully squeals opon cold engine start. Belt looks good, seems to be effected by the fan motor as well. Check to make sure there is enough tension on the belt. ...
791 questions posted
Usually answered in minutes!
1,310 Questions
953 Questions
963 Questions
862 Questions
85 Questions