1 isn't blown. At the black cable should be a ground signal if the selector in 'P' position. If you give me an e-mail address I'll send the wiring. The ABS problem, you have better to check followings
...rear door. You can just prise it straight off but you will probably break the little plastic pins that hold the panel on (they are real cheap to replace and take seconds to push new ones in) or you ...
...with new ones but still no joy the rear fog light works as rear side light bulb double fillermemt steve i think your talking headlight if so check fuse and relay they have ther own 1 left and 1 ...
Question about Cars & Trucks
...1 Did the wiring diagram work? I'm using the computer at library, not sue how posting wring diagram on this computer works? There are separate fuses for right and left rear park lamps. The rear tail ...
...lights and console lights dont work Rear park lights and console lights stopped working. Could it just be a fuse? And where is the fuse box? Could be a fuse or 1 light bulb burnt out Launch ...
...rear turn light blinks also 1 red light(left out most bulb lights) when making right turn: right rear turn light blinks only. When making left turn: inside headlamp assembly ,Left front orange bulbs ...
...rear end which should run down 1 side of car coming from front to rear via in sill [thats in the side by the seats in side under the carpet either side] or it could be a earth wire broken so remove ...
Question about Land Rover Discovery
...sonic 2Pack 4 9Feet 1 5Meters USB Charger Cable for Apple... -Did you recently work on the power line to the rear light...? If so it's in backward. Tips To Be Secure Whilst Driving At Evening ...
Question about Cars & Trucks
...1 (J-Case) 37 Rear Blower (J-Case) 38 Empty (J-Case) 39 Run (High Current Micro) 40 Park Lamps (High Current Micro) 41 Empty (Mini Micro) 42 Upfitter Auxiliary 2 (High Current ISO Relay) 43 Retained ...
Question about Cars & Trucks
...for a bad connection. Follow the rear lighting wires from the tail lights forward until they join into 1 main loom. Find the connector plug and make sure that it is clean and making a good
462 questions posted
Usually answered in minutes!
325 Questions
233 Questions
215 Questions
235 Questions
219 Questions