1996 Land Rover Discovery "3 remove" Questions

Ad

Question about Land Rover Discovery

1 Answer

Remove the 3 screws at the bottom of the fan housing (you can see 2 and a 3rd is in the back) 9) Once you remove all 3 screws you can now from the bottom remove and expose the fan 10) If it?s full of

Ad

...torx screws securing fusebox then set aside 3. remove footwell air distribution tube off of heater box 4. disconnect multiplug off of blower resistor, remove resistor/replace, 5. Refit all ...

Ad

Question about Land Rover Discovery

1 Answer

...the same way. Loosen the bottom starter mount bolt 3-4 turns & remove the top one. Holding starter in one hand, remove the bottom bolt and pull starter straight out from flywheel. Hope this

...LE? 1. Pull out side facing seat or pocket cover. 2. Unscrew fastener and remove access panel. 3. Turn bulb holder anti-clockwise to release. 4. Remove bulb. Refitting is reverse of the above ...

Question about Land Rover Discovery

2 Answers

My battery is flat and my Discovery 3 cannot be My battery is flat and my 2006 Land Rover Discovery 3 cannot be opened by my key. What to do? John on the passanger door there is a cap that can be ...

Question about Land Rover Discovery

1 Answer

Remove 3 screws securing steering column nacelle halves together. Release clips securing nacelle together and remove from steering column. Exploded view of the steering column nacelle (cover) mounting

Question about Land Rover Discovery

1 Answer

...3 bolts as they tend to round off. 1/2" drive sockets are too big for the top one. Make sure you use 6pt not 12pt sockets if you decide to remove it. I was able to clean mine on the drive without ...

Question about Land Rover Discovery

1 Answer

...Remove 1. Disconnect battery negative lead. 2. Depressurise fuel system. See this section. 3. Raise the vehicle. WARNING: Support on safety stands. 4. Position container beneath fuel filter to catch ...

Question about Land Rover Discovery

1 Answer

...3 on the left side of the cover and remove the aircon belt.With a 15 mm socket on a power wrench pull the auto tensioner to the rightand remove the belt , with a little skill and patience you can get ...

Question about Land Rover Discovery

1 Answer

...3) Remove road wheel. 4) Pull ABS Sensor harness through aperture into wheel arch. 5) Release harness from brackets on inner wing valance, suspension turret and front hub. 6) Release stake from drive ...

Not finding what you are looking for?
1996 Land Rover Discovery Logo

261 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...