...diagnose problems with a back up alarm on a 2005 ford escape? The switch in the dashboard remains lit up as off even if depressing it? what parts are involved and is there a way to test the sesnors ...
Question about Chrysler Cars & Trucks
...diagnose. Anyone seen this before? One thing you might try. To clear the 'check engine' alarm, you can disconnect the " + " power cable to the battery. Wait about 2 or 3 minutes, the reconnect it. If ...
...back and open door later Alarm reset has been set to sensitive or a faulty unit in either case have an auto electrician have a look at it to diagnose any problems that maybe going on.Hope this ...
Question about Lincoln Town Car
diagnose the rest of the issues until i can get a starting vehicle. Pull the driver's kick panel, the panel under the steering wheel and steering column cover. Remove the aftermarket alarm. Most are T
...diagnose which one is powering the alarm system. If you find one that turns the alarm pad off. Leave it off for a few minutes and turn the breaker back on to see if it will reset itself. If the alarm ...
...back. same thing happen to mine i paid some idiot that said he knew what he was doing he took my door panel apart and mess around with the key lock stupid truck went into theft mode and now my fuel ...
...back to the dealer and have it replaced. First thing first. Disconnect the battery, leave it alone overnight & then reconnect. If the beeps keep on coming the alarm sensor trigger has got stuck ...
...replacing backup sensors on a 2006 Ford F250 truck, but information is ... Offered up an aftermarket back up camera for $150 in place of repairing the factory system. ...The backup alarm did not
Question about Honda Cars & Trucks
...First it has to be put back together. Then codes read, write them down, clear the codes and see what comes back up. Diagnose what is wrong and go from there. Could be the key,wiring or
Question about Lincoln Town Car
...back home, I saw a green light of the key symbol in the dashboard blinking and I tried to unlock with the remote and it didn't do anything. It looked like it was just dead. What should I do? ...
946 questions posted
Usually answered in minutes!
900 Questions
787 Questions
686 Questions
613 Questions
634 Questions