1994 Lincoln Town Car "brake pedal safety switch" Questions

Ad

Question about Lincoln Town Car

2 Answers

...brake pedal is depressed and the brake light switch activated, you most likely have an issue switch or the wiring to it, 1st thing to do is see if the brake lights work, if not jumper the switch at ...

Ad

Question about Lincoln Town Car

4 Answers

brake pedal already If the brake light switch doesn't work then the solenoid that allows you to move the gear selector out of park is locked out, it is a safety feature required by law, jump the brake

Ad

...Brake pedal which sends a signal to the Brake lights and a starter circuit. If the Brake lights do not light up with a foot on them, then a starter signal will not go through either. Look under the ...

...brake pedal, it shoud have two green wires on it. Make sure it is not melted or the wire is broken. If it is damaged you can connect the 2 wires together to get it into gear, but this should be ...

Question about Lincoln Town Car

1 Answer

...brake pedal, it shoud have two green wires on it. Make sure it is not melted or the wire is broken. If it is damaged you can connect the 2 wires together to get it into gear, but this should be ...

...of place or broken. The brake pedal lockout complete the start circuit. It was designed to do this to prevent runaways which is similar to your car going into reverse whenit should be locked in

...brake pedal depressed in order to shift out of "PARK". This is to prevent possible vehicle runaway. There are a couple of possibilities here. The first is the Brake Pedal Position (BPP) switch. You ...

...brake pedal ? I had this same issue on my 97 Honda Accord SE, but when I changed the Brake Light Safety Switch, the problem was not solved! Turns out the small blue plastic "pin" that presses on the ...

Question about Lincoln Town Car

1 Answer

...brake pedal and have an assistant check to see if the brake lights illuminate. Step 4 * If all the brake lights are out, locate the brake light switch on the brake pedal linkage. Check for 12 volts ...

Question about Lincoln Town Car

3 Answers

I had to rig it up so that it would work until I could go get myself a new brake pedal and have it put on. ( new pedal needed because that pin and its housing are one peice with the whole brake pedal.

Not finding what you are looking for?
1994 Lincoln Town Car Logo

837 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Lincoln Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...