...front wheel bearing on a 2004 KIA sorento 4WD I found this info, click on the link. This may be a tough diy? The bearing may need to be pressed out and the new one pressed in. ...
Question about Kia Sorento
...replace the brakes about 4 months ago The sound could be a warning that the front wheel bearings are worn out...this should be a free inspection at your local brake/suspension/muffler repair ...
Question about Kia Sorento
...front brake disc and pads, motor was replaced with a low mileage warrantied used motor, pass side exhaust manifold gasket was changed, both two bolt exhaust flange gaskets changed with new. I'm ...
Question about Kia Sorento
...front tire was worn .A couple of days later heard a squealing noise coming from the right tire area.Killed on me while driving 60 on freeway.Pulled over and would not restart. So it went from a tire ...
Question about Kia Sorento
...replace a front wheel bearing in a 2005 mercury mariner? These video might ive you some idea: How to Replace Front Wheel Bearing Replace Front Wheel Bearing Hub Ford Taurus Mercury Sable How To ...
...to replace Front wheel bearing? http://howtobyme.blogspot.in/2012/02/how-to-replace-front-wheel-bearing.html-----------Check all 3 links one by one.This will
front wheel need to replace bearings or hub assembly which is best A Front Wheel Drive Vehicle Can Have Two Types Of Rear Wheel Bearings: Serviceable Bearings, Or Nonserviceable, Sealed Bearings. When
...replace a front wheel bearing? front wheel bearing is pressed into hub and has retaining clip on rear and then cv axle shaft comes through center and has a nut and keeper pin. Rule of thumb is to ...
Question about Honda Cars & Trucks
...replace wheel bearing on 93 Honda del Sol front wheel bearing what's the easiest way to go about it thank you Here's a link on your wheel bearing. SAVE 20 GET 10 GIFT CARD ON ONLINE SHIP TO HOME ...
Question about Kia Sorento
...replace front wheel bearings with out a press In order to remove the front wheel bearings without press hub off the bearing and then the bearing out of the knuckle. To do the first step need a a ...
1,327 questions posted
Usually answered in minutes!
787 Questions
590 Questions
514 Questions
148 Questions
163 Questions