2004 Kia Sorento "btdc ignition" Questions

...ignition timing is fixed BTDC 5 and DTC P1330 is set when connecting Ignition control terminal of Data Link Connector and ground. If disconnect Ignition control terminal of Data Link Connector and ...

...ignition timing, it's 41 btdc & should be 8 btdc it didn't pass smog, it was 41 BTDC & should be 8 BTDC you will need a timing light to be able to adjust the distributor to make the timing 8 btdc ...

...ignition timing for my car. If it is timed on one it absolutly does not run right. Anywhere else it does not run. first you have to remove the shunt, then you set the timing at 10 degrees before top ...

...on this,,, what timing are youtalking ignition or valve ? 10 degrees btdc is about right so check for other problems like crank /cam sensor position sensors , immobilizer ,or ignition control ...

how do I fix my ignition timing on my 1997 nissan 200sx to pass smog, it's 41 btdc & it should be 8 btdc what do I have to do so it can pass CA. smog? Buy a newer car?

...BTDC? Probably, but it is all done electronically by the ECM and the Crankshaft Position Sensor. The days of timing lights and marks are long gone. ...

...ignition be set to run on unleaded petrol so no damage will be caused to valves. ****. Hello Michaelatkin : Is this jaguar US based as far as specifications ? US-Based with engine running and Timing ...

BTDC on ignition timing and failed SMOG Test in CA. Listed as GROSS POLLUTER. Passed SMOG Test at 25 mph but failed at 15 mph with 3,951 NO PPM (MEAS) something wrong here with 99 degrees btdc it will

...ignition timing: 30 BTDC. How do I adjust this and where should it be at? hey why dont you buy a timming gun or borrow from somebody and time it with that, make sure its 12 degrees btdc and make sure ...

...ignition timing should be 10 deg. btdc.Make you a fused jumper wire and with the engine running jump terminals -te1 and e1.This will allow you to adjust base timing.Connect your timing light to spark ...