2004 Kia Sedona "cylinder 3 bad" Questions

...bad or is the timing off my mechanic says that the timing isn't off becaue if the timing was off one tooth the car wouldnt start. so i brought to another mechani and he told me that tha cylinders are ...

Cylinder 3 swapped plugs between 3 and 4 on Pontiak Aztek 2003. Misfire remained on cylinder 3. Swapped ignition coil 3 and 6 with ignition coil 1 and 4 misfire still on cylinder 3 Try a new plug wire

...cylinder 3 misfire CYLINDER 3 MISFIRING. MEANS NOT FIRING .CYLINDER 3 IS MISSING FIRE.COULD BE FAULTY OR DIRTY FUEL INJECTOR.YOU COULD HAVE BAD SPARK PLUG OR COIL AND WIRE.CLEAN FUEL INJECTORS CHANGE ...

...cylinder 3 misfire po303 is misfire on number 3 cylinder. It could be a bad spark plug or wire, maybe a loose plug wire, could be alot of things. injector problem drop of water in fuel that happened ...

...cylinder 3 misfire) which would mean the coil is bad....no luck still a cylinder 5 misfire. Whats my next step? Check fuel injector and compression in cyl. #5. I would check for a bad plug wire next ...

3 cylinders and i have chnged the leads the coil pack is new. using a lot of gas Determine what cylinder is misfiring and do a compression test on that cylinder. Compare it with a cylinder that is not

...3 cylinder Which one is the number three cylinder on a 2002 Toyota Highlander 2.4 l engine? EASY 4BANGERS (NON BOXER ENGINES) 1,3,4, 2 FIRING ORDER F1234R FRONT IS CAM DRIVE END, REAR IS TRANNY ...

...cylinder 3, cylinder 3 in an ohv engine is in the back cylinder all the way to the right, check coil to make sure its firing , take boot off coil(its numbered 3)leave there, start car, make sure ...

cylinder to another and still have cylinder 3 misfire under load. bad enough to make the check engine light flash. Do a compression Check. Possibility of a bad valve in #3 cylinder causing the misfire

...3 may have gone bad. Thats where i would start. If you check and find out that one coil pack connects to cylinders 2 and 3, remove the coil packs and switch their positions. Reconnect the wires and ...