2004 Kia Optima "wrench sizes cars" Questions

...by, once you spot it, look and see if you will need either a plain 3/8ths rachet or a sized wrench tool, if its a little square then you just need a rachet if its a nut then use a wrench, and ...

...short circuit that may blow up some of the fuses. To remove the positive cable you must have a wrench that has a size either a 12 mm or a 10 mm. just turn the wrench counter clockwise. The other ...

Where exactly is the fuel filter and how hard is it to change? It's located back by the gas tank. All you need are two wrenches of the appropriate size. Just be careful when you loosen them not to ...

what tools do i need to change front brake pads need a torque wrench, 3/8" drive 1/2" drive sockets, large screwdriver, screw in front caliper compressor, jack, jack stands, fluid catcher (pale), ...

...ATTENTION to that. There is a fitting on each end of the filter which you can remove with a wrench. Remove both ends and have the other filter ready to install. NOTE>>>> In some cases, fuel ...

...sizes. You will need to try the wrench you have on the wheel nuts on your vehicle. - Some of the wrenches have several different sizes, so when you find the one that fits snugly, you can mark it with ...

Flare nut wrench size? Trying to replace a metal brake line to the rear brakes and I don't know what size flare nut wrench to use. I have SAE 9/16, 1/2, 7/16 and 3/8 wrenches. None of these fit my ...

mercury mainer 2008 front brakese allen wrench or hex size to fit caliper mounting bolt size needed hex or allen wrench fit mounting capiler Allen wrench size to remove brake caliper on my 2008 ...

cars/t19454162-change_thermostat Aug 16, 2013 - change thermostat - Mitsubishi 2002 Diamante question. ... What size wrench do I need to change the thermostat on a 2002 diamante. May 29 ... Unanswered

2001 Cadillac sls power steering hose replacement You have to get an 18mm tubing wrench to remove the lower connection of the  pressure hose from the power rack under the car. This size