2003 Kia Rio "clutch pedal soft gears engaging" Questions

...Thanks in advance for your help. is clutch pedal soft! if so it could be the hydraulics [ or cable ] if not that then its the clutch that needs replacing! Make sure they machine the flywheel

...clutch pedal feel, slipping clutch, unintended clutch release, hard gear engagement, no/insufficient clutch movement. *2. Clutch pedal Mounting Plate (possibly cracked)-this will cause improper gear ...

Clutch pedal on 2016 jeep Patriot has no pressure can not engage gears no movement forward or reverse Jeff, this should be warranted, take to dealer. Could be a faulty clutch hydraulic cylinder. ...

manual trans. Will not shift into gears. New clutch and fluids are full. No grinding or loud noises while running. Just will not engage gears. Is it the slave cylinder not engaging? Is the pedal soft

...clutch pedal is soft. hi first thing to try is to adjust the clutch pedal cable up that is done at the gearbox side by adjusting the 10mm nut on the end of the cable, if after you have done this you ...

pedal pushes into the clutch master cylinder bolted to the firewall under the hood. This cylinder has a reservoir filled with brake fluid. When the rod forces fluid from the clutch master down a steel

pedal. The clutch problem could be rectified by adjusting the cable, if fitted, or the actuating mechanism is stuck in and not releasing the clutch. Does the pedal feel soft or in an unusual position.

...down to put car in gear and the pedal was soft and clutch did not engage, is it a linkage problem check the fluid in the clutch resovoir and make sure there is fluid in there and then get back to

honda accord 1995 ex vtec manual gears do not engage checked fluid and seems to be alright. Clutch Pedal ss a bit too soft it may have air or link(s). check clutch system.

Clutch has just started engaging close to floor, and pedal has gone soft, hard to place in gear when idling. It probably has hydraulic clutch cylinder, meaning it is low on fluid, they use brake fluid