...transfer case is engaging front drive shaft but no power going to hubs. Internally, hubs appear to be in good condition. I had this happen to mine, and it was a cracked vacuum line going from the ...
...not engaging in the transfer case. May need to replace the switch itself. Most new vehcile are all electronically engaged. Replace the switch. Cheap fix compared to going into the transfer case
...transfer case is in & dash lite shows 4x4 but front wheels don;t lock in. Hi It could just be low fluid in the gearbox/transfer box have you checked these? Is the car new to you? looking how to ...
...transfer case is broken thats why it won't engage into 4wd with the manual 4wd hubs? dont worry about vac hoses as they are redundant with manual lock. i changed to manual and all fine so ...
...transfer case is working, if not check the voltage to the actuator and make sure it is getting a signal if it is then change out the actuator, if it isn't then you need to case back to the fuse and ...
...every thing for transmission its running but wheels not running please i wont your help this is my e-mail [email protected] the problem is in the transfer case.the position switch is maybe
...2 years ago. Check the vacuum lines running from the transfer case to the hubs, one of mine was cracked, and therefor the system cannot '****' the locking hubs in place. It cost me 50 cents to
...in engine compartment or in dash board . look at transfer case look for vacuum lines or electric lines.its probably electric. because most 4 wheel drive uses electric motors.99 up to 2009s
transfer case. The dashboard 4wd light comes on, but the front wheels will not spin. The vacuum locking system has been removed from the equation; over a year ago, the vacuum pump was disconnected and
1,371 questions posted
Usually answered in minutes!
1,074 Questions
1,058 Questions
753 Questions
343 Questions
275 Questions