2002 Kia Sportage "2 timing" Questions

timing marks NOTE: The arrow at "2" on camshaft pulley must be aligned with timing mark on front housing. Install timing belt. Install timing belt cover. Pressurize fuel system. Start engine and check

2) timing cover with a new gasket(s). Remove the engine crankshaft pulley bolt and pulley. Using SST 09249-63010, or equivalent, install the mounting bolts for the right-hand mounting bracket. Tighten

...2 bolts and lower timing belt cover. Loosen tensioner lock bolt and pivot tensioner pulley outboard. Retighten tensioner lock bolt. NOTE: Mark timing belt for rotation if it is being reused. Remove ...

...timing marks so I can replace broken belt.2 ltr DOHC turbo injected Crankshaft match marks Align marks on timing belt pulley and pump body. Camshaft pulley alignment marks Align marks on camshaft ...

...time A number of reasons for overheating of the car. 1. The water pump not working full time/force. 2. Loose fan belt which runs the water pump too. 3. Low or dirty oil in the sump. 4. Mal/over ...

where is cylinder # 2 cylinder misfire the orer of the cyls from front to back 1 first 2 second 3 third and the last at the windshield is 4 so you should have a coil on 2 or 1 and the wire goes to ...

p0430 code I have a p0430 and 0420 catalyst system inefficient bank 1 and 2. This is a 2.7 v6 it has two catalytic coverters banks 1 and 2. I just replaced the spark plugs it that seemed to smooth the

2.0 timing belt diagram AND ... JustAnswer https://www.justanswer.com > Kia Troubleshooting May 1, 2019 - Install the timing belt lower cover(A) with 5bolts(B). Tightening torque : 7.8 ~ 9.8N.m (0.8 ~

how many times will a crank turn before both cams turn 1 time when setting the timing on a 99 kia sportage 1 revolution of cam, for every 2 revolutions of crankshaft.

...are closed you may have 2 put timing cover and crank pully so u can find the dtc marks then u might be able 2 sort it out on the factory marks it sucks when people have made up their marks good ...