2002 Kia Spectra "brakes wont hard changing cylinders" Questions

...brakes hard but wont immediately stop kinda stuck on whats next rotors good check the brake booster if the pedal is really hard and no feel to the brakes check the hose to the booster from the engine ...

...brakes wont bleed I replaced all pads, rotors, calipers, the master cylinder, and 3 of the brake lines. The rear wheels bled just fine but neither front will bleed. I tried bleeding the master ...

...brakes, after changing the calipers and master cyl., did you also bleed the proportioning valve? Sometimes air can get trapped in the valve, and its almost impossible to get it out bleeding just the ...

...hard and the Calipers stuck also the rotors got really red. I appreciate your help thanks. Did you use DOT # 3 Brake fluid to fill up the master cylinder like your suppose to or did you use DOT #5 ...

...wont come off hit it hard with a rubber mallet to loosen it if that dont work spray it down with wd40 make sure not to get any on you brake what it is is that your back brake master cylinder might be ...

...wont my clutch disengage? its hard to shift gears i replaced the master cylinder and now there isnt as much clutch movement as be for and scene i installed it if been having problems shifting the ...

brakes dont work right,when you push on the pedal its hard as a rock and wont stop,but if you let up and wait a minute and do it again the pedal feels normal and it slows down but does notstop all the

...brakes are pressed. I have already changed the fuse and brake lights, still nothing. The reverse and signal lights work fine. Now, I am trying to locate the brake switch, but not real sure what I am ...

...wont pump up to bleed air out of lines could master cylinder or booster be bad Booster is okay, you have to bench bleed the MC, first. So, since it is installed, bleed it with a kit from the parts ...

...wont engage i changed the master cylinder and the hard hose from the slave to the master air still in the lines, bench bleed the system, it will take 2 people to do this,, its just like brakes, ...