2002 Kia Sedona "top dead center valve position" Questions

...top dead centre,no.1 cyl up where do the exhaust cam gears on the rear have to be set at? please some 1 gimme some insight.posibly a diagram if possible, thanxs. Hi There, Didn't see your name so ...

...top dead center (BTDC) or 17 crankshaft degrees BTDC. The engine control module (ECM) can only command the CMP actuator to retard the valve timing from the Park position or advance the valve timing ...

top dead center. You may be able to use a piece of copper wie, about #14 or larger, to determine when the piston is a top dead center. You will then have to determine if both valves are closed. I have

...top dead center but now i cant get the camshafts to top dead center. i Had to turn the crank a couple of times before to get the cranks itself top dead center. i did that with the old timing belt on. ...

...100,000 miles and let it break, yes the engine is damaged. The valves will lock in an"interference position", so when the piston reaches top dead center, it hits the valve. You have a dead

...top dead center. The cams have timing marks on them also that have to be in the correct position, this is extremely critical because if the cams and the crankshaft are not in the proper position the ...

...top opf dead center(carefully insert a long skinny screw driver into the #1 spark plug hole to feel the pistons top travel while being sure the valves are both closed as explained above). With all ...

to be and the camshaft have to be Number 1 piston has to be Top Dead Center and the cam has to be in a position so that both valves on #1 are closed and when you turn the cam , the exhaust valve opens

...see if belt has slipped Camshaft setting tool put in position(rocker cover off) pump locking tool inserted, top dead center mark on flywheel in correct position.if not correct something won't line ...

...top dead center). It sounds complicated to understand, but it is simple to imagine like this: All valves are closed and Piston #1 is up at high position to make a peak compression and a spark ignites ...