...timing belt or chain,and when would it need replacing? I have a 1.5 CRDi which uses the Mercedes engine and has a cam chain not a beltCheck the owners manual the chain doesnt need replacing on any of ...
...timing marks for chain or belt versions here is both. If it is for the belt version and the belt has snapped, then you will have bent valves that will have to be replaced. Both engines are ...
timing belt/chain ?????????? help. That's what happened to mine when the timing chain broke.. my 04 cinco had about 80k miles on it at this point. Unfortunately I warped the valves when it happened so
...if there is none then you need a new engine!!! Do you think it might actually be the timing belt/chain...ours just did the same thing and it turns out the timing snapped and the entire motor is ...
...timing chain/belt has come off, the clunk you hear is the piston moving up to hit an open valve, don't try turning it anymore untill a mechanic can confirm, I have seen a valve crack a piston from ...
timing belt broke and you are going to have one heck of a time getting everything repaired. Before you go pulling the fuel pump and everything, check your fuses, on the engine valve cover there may be
...timing chain/belt (not sure what it was- I'm a girl : ) went. I got a new engine under my Kia warrant (thank goodness!!!). About 3,000 miles ago I had an oil change at a quick lube place. They talked ...
...timing belt/chain. You can get to this by removing the cover. It should just have one or two bolts. It is located on the left of the engine. Make sure your battery terminals are clean and they are no ...
...timing belt/chain. It could be a cam sensor or crank sensor. It could be the computer. I know it is a lot of parts, but if any of them are bad, it can cause the car to not start. As long as it is ...
753 questions posted
Usually answered in minutes!
685 Questions
635 Questions
542 Questions
277 Questions
284 Questions
