2001 Kia Rio "cylinder compression" Questions

...other problems. If you do a compression check and have compression on all cylinders but extremely high compression on 1 or 2 then the problem is the Head gasket, head or Cylinder wall being

If the problem didn't move, and the compression is fine, then you have a vacuum leak on the intake runner to that cylinder, possibly the intake gasket. Print this and give it to your new mechanic

...cylinder compression tester from autozone. you could also do a leakdown test by getting an adapter that screws into the spark plug hole and fills the cylinder with compressed air and allows you to ...

...and low compression since it had a head job ;what is the peoblem? your timing sounds like its a couple of teeth off but if cylinder wont hold compression when valves are closed you have a bent ...

...and won't start kia stopped running on fwy and now won't start and has no compression in two cylinders vary little in the other two the timing belt isn't broke sounds like u blew a head gasket ...

...check for intake manifold vauum leaks with a can of carburetor spray. You should also run a compression test on all cylinders and see if that one cylinder is lower than 5% from the hightest

...COMPRESSION OKAY I WOULD REPLACE VALVE SEALS REPLACED AND HAVE THE WHOLE CYLINDER HEAD RECONDITIONED IF CYLINDER BLOCK PISTONS ALL OKAY.IF ENGINE IS SMOKING A LOT OF BLUE SMOKE OR YOU HAVE TO KEEP ...

...cylinder 1,3,5 misfiring when replaced coil pack, it went away now cyl 4,6 misfiring and idling low at 500 rpm. Replaced coil pack and it is still misfiring. Checked timimg, compression test, no ...

how much compression should a 2001 KIA RIO have???? 130 to 150 and all cylinders should be within 10% of each other or if compression is low you could have a cracked ring or bad valve

oil on the tip of one of my spark plugs have a compression test done to check for a ring failure problem for that cylinder that has the oily plug.