2000 Kia Sephia "front wheel bearing" Questions

...front wheel bearing That is not that hard to do ! first lift car take wheel off then take the caliper off and brakes ,braket that stops rotor from coming off then take rotor off then take spindle nut ...

front wheel bearings on a 1994 Kia Sephia? its a pressed in bearing,i would recommend u to have it done by mec.but here goes,take wheel off,undo cv axle center bolt,undo brakes,calyper,disc rotor,undo

wheel bearing on the front driver side Most hubs have sealed bearings in them so when you get the hub out you will have to replace the hub assembly. As for getting it out try using a slide hammer with

loose front wheel seems to be loose at the tyrod or could this be stuts jack that side up move the tire side tierod shoud have no play. then move wheel up and down check for play in wheel bearing

...a terrible grinding sound from the right front wheel could it be the axle or the transmission Check the brakes and make sure the caliper isn't sticking. If OK, then it's probably your wheel

...front driverside hub come off to get to the wheel bearings???? From what I can find out, the job requires a special tool to remove the hub, that only the dealerships have. I might add, there was a ...

...Front wheel, left or right? or rear wheels, left or right? If your vehicle is very old, then if could simply be wearing out in which case differential, trans or wheel bearing noises are very common. ...

rear wheel hub nut what size is the nut to remove the bearings? I used a 32 mm to remove hub nut on front. I guess it would be the same for back hub nut.

...front wheel bearings on a 1999 KIA Sephia Here is a link with some information that should help you: ...

FRONT DRIVER SIDE MAKE A CLUNKING NOISE WHEN TURNING LEFT If there is a any vibration in the brake pedal, then it is wheel bearing. If it only happens on slow tight turns, and there is no brake pedal ...