Question about Kia Sportage
test 40 to 60 . new wires and plugs and coil packs. wiring to coils new. no water in the oil it was over heated still stumped According to DRE99gsx on supraforums.com who has similar problems: "btw, I
...cam sensor tells the computer to activate the injectors to start the car.But,there is another probabilty ,If the fuel is draining back to the tank,then there is two check valves on the left rear of ...
Question about Kia Sportage
cam gear and others gears all the way to crank gear all these MUST be aligned up properly with one another , if this is right the pin you describe will automaticly be in correct place if you think you
...test the cam sensor on the car? How often do the computers go bad? My OBDll scanner has no codes and no history. Any ideas? Thank you bk1990 check both of your fuse panels for a blown fuse. there's ...
...cam shafte sensor, crank shaft position sensors, two ecu's, check relays and fuses, charged & check battery. Tried to start with starting fluid in intake manifold. There appears to be no voltage ...
Question about Kia Sportage
...cam and crank sensors have been replaced and still won't start. Need help here... Well for starters, you need to diagnose the problem before replacing anymore parts. I say this because you ...
...crank position sensors, and 4 used cam position sensors that have all been rotated in and out in different sequences. I would not imagine, even though used, that this many units would all be bad. I ...
...test it for free. good coil, than check cam sensor, cam sensor senses the cam turning and tell the ecu to tell the coil to disperse the sparks to the plugs. cam and crank sensors, there no way of ...
no spark Most no spark issues are fuses, bad ignition module, bad coil(s), bad crank or cam sensors. Most parts stores will test modules for free. Crank and cam sensors can be tested using a ohm meter
Question about Cars & Trucks
...cam sensor has been changed twice. Have the crank sensor checked, some times a generic scan tool or code reader will pull a code but list cam sensor and then when code is read with a gm tool it reads ...
1,108 questions posted
Usually answered in minutes!
1,074 Questions
1,058 Questions
918 Questions
343 Questions
275 Questions