1999 Kia Sportage "3 head torque" Questions

...3 wiring connectors at the rear of the cylinder head Fig. Cylinder head torque sequence-Kia Sportage Cylinder head bolts in the proper sequence. Torque the bolts to 64 ft. lbs. (87 Nm). Cylinder head ...

...head down in four stages.i.e.20lbs/ft.....50lbs/ft.......100lbs/ft then down to max torque.we used to use this in the sixties for lotus/ford engines BUT they were rebuilt after 3 or 4 races.worth a ...

...EXTENSION, YOU NEED SPARK PLUGS GAP GAUGE AND A 3/8 RATCHET WRENCH. YOU NEED A TORQUE WRENCH ITS NOT MANDATORT BUT JUST DONT OVER TIGHTEN SPARK PLUGS OR YOU WILL DAMAGE THE ALUMINUM HEAD

Timing belt Cylinder head cover Cylinder head with the intake and exhaust manifolds attached 3 wire harness connectors at the rear of the cylinder head type in: http://www.kiatechinfo.com and register

3)   Carefully install the spark plug into the cylinder head and torque to 11-17 ft. lbs. (23 Nm).(4)    Reconnect high tension leads to the spark plugs.(5)    Install the two

...head bolts in 3 steps in proper sequence. Remove cylinder head bolts and washers. Remove cylinder head, intake manifold and exhaust manifold as an assembly. To Install: Install NEW cylinder head ...

...3: turn cylinder head bolts in sequence an additional 90-degrees recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) that permanently stretch during the ...

...3.4 Liter engine. I am replacing the head Gaskets and need to know the proper torque specs for the cylinder head gaskets. My manuel only gives the initial settings. I have the tighting sequice, need ...

...up to 65 ftlbs. Don't have the ... Head bolt torque Feb. 23, 2002 Torque Specs Nov. 3, 2019 Head Bolt Helllppppp! Apr. 3, 2010 Head Torque Specs Nov. 3, 2019 More results from ...

HEAD BOLT TIGHTENING SEQUENCE: INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs). In sequence, torque all bolts. Torque: 50 Nm (37 ft