2004 Jaguar XJ-Series "injector bank" Questions

Bank 1 P1316 Misfire Rate Exceeds Emissions P0102 Mass or Volume Air Flow Circuit Low P0112 Intake Air Temperature Circuit Low P0203 Injector Circuit Malfunction Cylinder 3 Sounds like a major problem

...causes- Intake air leaks- Faulty front heated oxygen sensor- Ignition misfiring- Faulty fuel injectors- Exhaust gas leaks- Incorrect fuel pressure- Lack of fuel- Faulty Mass Air Flow (MAF) ...

...Injector/Injection Timing Control Circuit P0217....Engine Coolant Over Temperature Condition P0218....Transmission Fluid Over Temperature Condition P0219....Engine Over Speed Condition ...

where do i find bank 1 and bank 2 fuel injectors Well, you will find bank one fuel injectors on bank 1, which is the side with #1 cylinder and the bank two injectors will be on the opposite bank. This

injector bank output driver stage does not respond properly to thecontrol signal. P0205 (M) Injector # 5Control Circuit Injector # 5output driver stage does not respond properly to the control signal.

...Injector Circuit High P0296 Cylinder #12 Contribution/Balance Fault P0300 Random/Multiple Cylinder Misfire Detected P0301 Cylinder #1 - Misfire Detected P0302 Cylinder #2 - Misfire Detected P0303 ...

...Multiple Faults - Bank 2 Mazda: Injector Multiple Faults - Bank 2 Mercury: Injector Multiple Faults - Bank 2 Mitsubishi: MAP Sensor 5-Volt Supply Fault Volkswagen: Cooling system ...

...bank of the engine all had the injector grounds spliced together, so all injectors on one bank fired (pulsed) simultaneously, and then the other bank was fired or pulsed. That was good until ...

...injector connector on bank 1, with the key in ON. The inj. connector only has two wires, a power and a ground wire. One of them should be hot in on. If no power on bank 1 injectors, trace it back to ...

...affect both banks injectors --very possible --not working properly , blocked HO2S sensor as well as it controls the injector operation to that bank in the exhaust manifold or before the cat ...