2002 Jaguar S-Type "hit head worried" Questions

back on This is important. Place the valve cover back on the head exactly where you want it without hitting anything. If you smear the wet RTV, you're going to have to clean it off? step 10Final Steps

hit shows VIN-=Y shows 4 in the 2 heads 2x2.=4 left and right heads outside ends. and 1 rear and front of head for 6 total, https://www.npdengines.com/product-page/96-99-cadillac-deville-4-6-northstar

...hit about 60,000 miles on the odometer...Korean built cars are not the best built cars on the road and after 100,000 miles, I would personally consider selling it before you end up with a bigger ...

...head bolts were all pulled down at once with a big air operated tool and pistons were fitted with a 2lb club hammer but hit the pistons with the wooden shaft ,built at 3 engines a minute line speed ...

...head). Possible damage? You could have knocked it out of allignment or a remote posibility of damage to the shaft or bearings. It is normal to feel and hear things that you never heard or felt before ...

...will contain the maximum amount of 'milling' that can be done without worrying about the pistons hitting the valves or underside of the head. Don?t let the engine overheat, this will cause serious ...

...hit major inclines just right to I will not be able to maintain speed until I am on level ground. My 4 Runner is a V-6 Automatic, 2 wheel drive. I am trying to decide...trade up or fix. I really like ...

...is not wasted Use a bit of masking tape to hold it in position and give it a couple of sharp hard hits to the top of the threaded bolt Try to crack it open If not then you need to apply some to the ...

...head on the car now i pulled out the motor and gearbox out of the car and worked on it dureing that time the gearbox oil leack a liltle bit but we forgot to put the oil back into the gearbox i drove ...

...head off my crx to have the vavlves done and now that I have it back in it doesnt want to run right. Thought I might have put the distr. 180 out so tried that and still running rough.Lined up the ...