1994 Jaguar XJ6 "computer codes" Questions

Ad

Question about Jaguar XJ6

1 Answer

are stored in the computer, these codes will tell you where the problem is and with some diagnosing the problem can be found, you may need to have someone with a scan tool check this to pull the codes

Ad

Question about Jaguar XJ6

1 Answer

limp mode xj6 The on board computer (ECM) has put the car in limp mode (reduced power) because it has detected some kind of serious error in the systems operation, this can be the engine or ...

Ad

how do I reset the computer on 1988 xj6 jaguar TO RESET ECM ON A 1988 XJ6 JAGUAR.YOU DISCONNECT NEGATIVE BATTERY CABLE FOR 30 SECONDS TO CLEAR CODE.THIS WONT DO ANY GOOD IF YOU HAVE A ECM TROUBLE CODE

...at this time and you will need to service it or replace the entire device. This is basically A computer-controlled air bypass valve located in the throttle body. It helps control idle speeds by ...

...codes.com/p0016 Basically, it looks like you have timing issue. Could be the cam or crank sensor or the timing belt. The P0017 code would imply that you have at least two cam sensors (V6 or V8). The ...

...fail code 44 still shows up after changing the front o2 sensor.i disconected the battery and reset computer but light still on. i put in regular unleaded gas instead of premium could that be setting ...

...come right out to your car, plug in their scanner read the faults and clear codes. you have to reset the computer.look in your owners manual.if you had it serviced at a shop they should have reset

Question about Jaguar XJ6

1 Answer

...fails the computer cannot detect the failure, so the engine doesn't start and the computer thinks everything is okay with no codes. If no trouble codes are present proceed to the next step. ...

...in the VCM in a jaguar 1991 xj6 sovereign? Code 44 means that the oxygen sensor is signaling the computer that the fuel mixture is bad - too rich or too lean. XJ 6 1991 has fuel code 44 set and

I HAVE A JAGUAR XJ6 3.2 1994 , AN NEED THE IGNICION AMPLIFIER CIRCUIT, IS MY FAIL I THE COMPUTER CAR FAIL 24, SORRY FOR MY ENGLISH Typically code 24 is reserved for the ecu to ignition amplifier. ...

Not finding what you are looking for?
1994 Jaguar XJ6 Logo

516 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Jaguar XJ6
1995 Jaguar XJ6

578 Questions

1993 Jaguar XJ6
1993 Jaguar XJ6

210 Questions

1990 Jaguar XJ6
1990 Jaguar XJ6

172 Questions

1991 Jaguar XJ6
1991 Jaguar XJ6

129 Questions

1992 Jaguar XJ6
1992 Jaguar XJ6

83 Questions

Top Jaguar Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...