2004 Infiniti G35 Sport Coupe "cupholder open" Questions

...open and close the cupholder compartment. Any ideas. I am going to find an '05 infiniti to look at the cupholder so that it will give me an idea on how to get it working again... u need to take apart ...

...cupholder, you need to remove that odd-shaped panel directly below it on the lower dash. There is 2 screws you can remove from there and then there are 2 more on the sides of the cup holder you can ...

volvo xc90 front seat cupholder cover on center isnt working I am having trouble opening the cover for the front seat cupholders. It seems something got stuck in the rear and I want to know how to ...

...open and from underneath push up gently on each plastic clip where the cupholder meets the dash they are on the bottom furthest outside edges I used two tongue depressers, pushed the cupholder in a ...

...cupholder is broken. The cover won't open or close by pressing it. The spring mechanism doesn't seem to be working. Is there a diagram showing how the parts are supposed to work? I took off the cover ...

open this cover with a flathead and remove the two screws found at the bottom. Then remove the cup holder and unscrew the screw in the front corner on the left side(if sitting in the drivers seat) and

...open the armrest. On the TOP of the FRONT of the armrest, just above the cupholders, are 2 more screws which should be the same as the 2 bottom screws. Remove these, then lift the cupholder assembly ...

open the center console to access wiring etc. that is behind/below the ash tray in a 2002 Lexus ES 300? you will have to take most of the drivers side of the dash out to get access to the panel behind

...is. It's held on by 4 plastic screws. Pull the ashtray/cupholder open. The white actuator is held in by 3 8mm screws. The top one is the hardest to get to.Replace it and your problem is fixed.Good ...

open all the way, making the cupholder useless. Getting access to remove the object was quick and easy - all it takes is a small flat blade screw driver. Use the screw driver to gently pry up the wood