2004 Hyundai Elantra "serpentine belt squeak start" Questions

...serpentine belt. squeaking noise in engine. never heard before. not serpentine belt. all pulley systems seem to be ok. started the truck up this morning and immediately the noise appeared. You might ...

...Serpentine Belt, belt tensioner, alternator, and PCV Valve. STILL squeaking at cold start. Been happening for about 2 months. well GUESS what. For the past 3-4 days. NO SQUEAKING. WHAT happening? It ...

serpentine belt squeaks on startup I have a 1999 Ford Crown Victoria p71 and when I start my car, the belt squeaks for a few seconds, seems like until that car warms up. I believe it needs to be ...

serpentine belt. Usually a new belt will fix the problem. You could have premature belt failure due to a weak tensioner, oil leaks,or other accessories that are attached to the belt. Hope this helps :

serpentine belt and it made the squeaking noise worse so i took the belt off and turned all the pulleys. All of them turned fine except the camshaft pulley. Is this normal? and if not whats wrong with

serpentine belt squeaks got a new engine, started my car belt was squealing like a *****, so i replaced the belt, ( belt from orielys) **** still squeaks, HALP! try some belt dressing if that does not

serpentine belt and check if alternator pulley is a one way clutch. Should freewheel in opposite direction smoothly and lock up in drive direction. If it doesnt lock up in about 1-2mm of rotation, its

...serpentine belt and idler pulley if that helps. Also this does not happen during the summer. When I leave school it also squeaks really loud but eventually once again goes away after driving it after ...

...serpentine belt?" and "Should I just try tightening the belt pressure via the bolts beneath the alternator?" ok if it has a serpentine belt it would be flat with grooves on one side, ...

...serpentine belt is show spots of glazing and I not sure about driving any distance for the fear of breaking down....what's going on with my truck Your serpentine belt tensioner may be bad,not holding ...