...elentra gls but dont know how to wire them First of all, did the vehicle previously come with fog lamps? I'm assuming it didn't. Normally, each YM (Year/Model) Hyundai wiring harness is ...
...will try to help? if car is hatchback ? lift up hatch and look at the water drain channel alongside lamp? if there are 3x screws? unscrew and lift lamp off then unclup bulb/lamp board from lens bulbs ...
fog lamp replacement on 2008 elantra 38,ooo miles not under waranty , easy to change myself ? 1.Disconnect the negative (-) battery terminal. 2.Remove the front side cover screw. 3.Remove the front ...
...Seems that there is a short in the harness or in the front or rear light assembly as when the headlamps are switched the brake lamps are also contacting. So please check the rear lamp assembly , ...
...push the break pedal You either have a 'single filament' bulb installed in a 'dual filament' brake lamp socket ... OR .. you have a 'dual filament' bulb short circuited internally. Check your rear ...
...on the getz is easy just open rear hatch then you will see 3x pozi drive screws alongside each lamp assy that screw /secure the lamp to body at the lower endof drain channel? remove screws and ...
brake lights won't go out Stop lamp switch is shorted. Replace the stop lamp switch.
Question about Hyundai Elantra
2001 elantra glove box lamp and switch replaced but still not working every thing else in car is working?how can I access the wire harness for the glove box lamp????? [email protected] Check the fuse ...
...1. Disconnect the negative (-) battery terminal. 2. Remove the nuts holding the rear combination lamp. 3. Disconnect the connector and remove the lamp assembly. It is located in the trunk, behind ...
974 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
508 Questions
493 Questions
443 Questions
