...AMP FUSE (FUSION LINK) LOOKS SPLIT INSIDE CASING,I CANT PULL IT OUT WONDER IF THERE IS A TOOL I NEED ANY SUGGESTIONS WILL BE APPRECIATED THANK YOU my car has a 100 amp fuse in the fuse box and it is ...
...fuse is ok then you need to check the relay and the horn switch. You may have a dead relay or a bad contact from the switch. Hope this helps... Dale find were the horn is and using a test light check ...
...fuse. So I put in a spare 20 amp. I heard a click but still no horn can't tell if a/c works its low on freon. Here is the problem the next morning battery was drained so I jumped it off drove let ...
Question about Hyundai Elantra
...fuse the 10 amp under the hood change to 12 amp ran fine thn just shut off and will not start it just turn over i change coil igntion moldule and the j box is this a ground lose tht keep the fuse to ...
...FUSE, IT IS JUST A CONNECTOR. TO FASTEN THE MAIN WIRE TO THE FUSIBLE LINK WIRE. IF YOU PULL ON THE FUSIBLE LINK IT WILL STRETCH LIKE STIFF RUBBER. IF IT STRETCHES IT WILL NEED TO BE REPAIRED OR ...
Question about Cars & Trucks
amp draw. any thing more is the problem that is killing the battery. Once you see the draw the next thing would be to start pulling fuses one at a time, pull a fuse and see if the draw drops, when you
...fuse name it is or the true # engine stalls. and does the dash waring lamps go dead too???? if yes, that means the EFI system has no electrical power, and must stall. THE EFI needs 10 to 15vdc at all ...
amp ALT fuse. all this in the book , the schematic, all that. just ground the P wire. end story watch out for door locks, keep windows open , killing this alarm box. as it runs all door lock motor....
...need at least 700 amps to get the starter relay to trigger. The clicking in the fuse box under the hood is your relays clicking but not having enough amps to kick or the Relay is bad. The starter ...
653 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
508 Questions
493 Questions
