2001 Hyundai Tiburon "wrong front passenger side 4" Questions

...front side of strut tower, mounted on fenderwell. I hope help you with this, remember rated this help. Good luck. where is the fue pu,p on a 2001 triburon 4 cyll just changed filter on 01.its on the ...

wrong place on my 1992 Ford Explorer....I need a diagram or something to know if the wires are in the right place or not. from front to back 1-2-3 on passenger's side 4-5-6 on driver's side the coil 1

...4 by 4 drivers side door locke is stuck locked. I can get in the passenger side to lock and unlock other doors . what could be wrong with my door? door in passenger side will not open in the ...

you went wrong go clockwise. # 1 cylinder is on front drivers side. #2 is on the front passenger side #3 is on drivers side behind #1  #4 is on passenger side behind #2 and so on. Good luck. 

...front window motor for back window? This is going to sound wrong, but I have been told the window motors will match but not on the same side. For some reason they are crisscrossed. The drivers front ...

1 8 7 2 6 5 4 3 firing order, hopefully. You have odd and even numbered cylinder banks, driver side, front to back, 1 3 5 7 Passenger side, front to back, 2 4 6 8 If my database is wrong, then, my bad

...wrong, whats the firing order? firing order is 1-4-2-5-3-6 Asyou face the front of the car, Cylinders are numbered like this: 1 2 3 4 5 6 (#1 is on the passenger side near the firewall.) They should ...

wrong? your on the right track just make sure person on the brake pedal is holding them to the floor when you open bleeder and its closed all the way before the pedal is lifted, repeat till all air is

...wrong with it? make sure the firing order is correctly. going clockwise on the cap it should go 1-6-5-4-3-2 and the cylinders are numbered as follows: passenger side from front to back is 1-3-5 and ...

...front to rear 2...4...6...8.. fiing order 1..8..4..3..6..5..7..2.. I've changed the plug wires, rotor and cap and believe that I have the wires wrong. Could you please give me the wiring layout for ...