changing front wheel bearing 2003 tiburon how do i get the sensior off so i can take the bracket in to get the old bearing pressed out at the shop There's one bolt holding the sensor in to the ...
...P0141 = Oxygen Sensor Heater Circuit Malfunction (Bank1, Sensor2) CHECK WIRING BEFORE REPLACING SENSORS If 4 cylinder engine, there are only two O2 Sensors - Sensor 1 is on top, Sensor 2 is at
code b1360 firing circuit #3 / and what is he bpt? and what is he bpt?? what does that refer to? HYUNDAI OBDII DTC P1100 Manifold Absolute Pressure Sensor Range/Performance P1102 Manifold Absolute ...
2003 hyundai tiburon check engine light The check engine light on my 2003 hyundai Tiburon is on. Had it checked. The code was PO154.I know it has to do with the o2 sensor, but how can I find out more ...
Output Speed Sensor So my 2004 Tiburon is sending out a output speed sensor error code. It was replaced with a new one and ther problem is still not fixed. What else could be causing the output speed ...
where is bank 1 sensor1o2 sensor located pcm code 130 Bank one sensor one is the sensor before the catalytic converter on the side with cylinder one.Remember, a code for an O2 sensor does not always ...
What does this error code on my 1998 Tiburon mean? PO103 MAF/VAF circuit high input Hello oceanbreez It can mean that the mass air flow sensor is bad or you have a vacum leak. The sensor is on the air
...is replaced. really only way to find this out is to drive it with the scanner graphing the ox
2007 tiburon po153 engine light 27000 miles? P0153 O2 Sensor Circuit Slow Response - Bank 2 Sensor 1 For the 6 cylinder engine I got the above result which indicates an O2 sensor is bad or ...
I NEED TO KNOW THE EXACT LOCATION OF WHERE THE CRANKSHAFT POSITION SENSOR IS LOCATED ANY HELP WILL BE GREATLY APPRECIATED THANKS? Remove negative battery cable. Remove heat shield from starter. Remove
563 questions posted
Usually answered in minutes!
976 Questions
206 Questions
135 Questions
110 Questions
80 Questions