2001 Hyundai Sonata "timing belt marks 1" Questions

...timing belt on a Hundai what steps are involved in changing the timing belt, tensioner and rollers on a 2004 Hundai with a 2.7 V6 motor Remove all necessary components for access to the timing belt ...

Timing belt replacment Refitting timing belt so marks all line up when fitted. Is there a secret to doing this? 1.Align the timing marks of the camshaft sprockets (on the front and rear sides) and the

...timing belt marks ?? to st up turn engine to T D C number 1 cyl fire check the cam cog and view the hole in the cg is at top and the vertical line mark on cam bearing cap are lined up along with the ...

...timing belt as well. To properly time the engine, what you need to do before taking the old belt off is to put the engine in a particular position, with cylinder number one at top-dead-center on the ...

...timing belt incorrectly because i didnt do it myself? If someone who knows how to change a timing belt didnt do it, then it is most likely wrong. Timing belts are one of the more delicate things to ...

...there somewhere i can get a diagram of how the timing marks are aligned on a 2002 Sonata 2.0 There is an answer at this link ...

timing back up for a 1996 hyundai gle 2lt sonata Must have moved the cam cogs when i was replacing the water pump once i replaced the pump & put the serpentinne belt back on & went to check by turning

...timing belt,crank sensor,timing marks dead on.started car ran for 10min it shut off battery was dead replaced still will not start with new battery cranks no start. same reason for changing crank ...

after replacing timimg belt engine spiins free like there is no compression check #1 at tdc with distributor/timing marks on both pulleys.

...timing belt on and checking for compression or simply trying to start it. You will also need a floor jack to support the engine because you will have to remove the mount on the side your timing belt ...