2001 Hyundai Elantra "tighten loose serpentine belt" Questions

Ad

...the belt properly tensioned unless it's worn out. It only needs to be tight enough to not slip, too loose will squeal and you will have to tighten, to tight will kill alternator and you will spend

Ad

Question about Hyundai Elantra

2 Answers

...loose power steering and altenator Tighten your serpentine belt. If your vehicle does NOT have a Serpentine Belt, then check each belt, Power Steering Pump & Alternator, for slack (looseness) in ...

Ad

Question about Hyundai Elantra

1 Answer

...tighten the serpentine belt, like, now. Help! if the belt is loose you might have the wrong belt installed on, or the serpentine belt tensioner must to be replaced, they adjust automatic, with spring ...

Question about Hyundai Elantra

1 Answer

...loose,then you will need to replace your belt tensioner in order for your belt to tighten.another reason could be that it is time to replace your serpentine belt.hope this info helps.take care and ...

Question about Hyundai Elantra

1 Answer

...tighten the serpentine belt on a 2003 tundra? The serpentine belt should not have to be tightened because ther is a tensioner to keep it taught. If it feels loose then you need to check the tensioner ...

loose how to tighten it The belt has an automatic tensioner pulley and no other adjustment is needed or provided for.  If the belt is to loose you either have the wrong belt installed or the

...loose how do I get it to tighten You either have the wrong belt, or it's not on correctly. Make sure all of the pulleys are secure. (Like the power steering pump support bracket isn't loose) The ...

Question about Hyundai Elantra

1 Answer

...serpentine accessory drive belt loosely over the pulleys. Slip the belt over the tensioner. Remove the wrench from the tensioner bolt and the belt will tighten itself. Install the air filter housing ...

Question about Hyundai Elantra

3 Answers

...loose and I'm not sure where to tighten it. How do I tighten the belt? the serpitine belt on your car has a belt tensionor that keeps constant tension on the belt. with the engine off grab the belt ...

...loose enough to pull off. Replace the belt and tighten in the opposite order. Once the desired tension is reached, crank the car and run it for a few minutes. Finally cut the car off and check the ...

Not finding what you are looking for?
2001 Hyundai Elantra Logo

1,684 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...