2000 Hyundai Elantra "read obdii manually" Questions

...the codes, using the code reader as per owners manual. The codes can then be read from the OBDII reader and looked up in the manual to see what they refer to. Let me know if this helps.

because its encrypted so what ever you read will not be the correct code ,also chances are if you try connecting a scanner to the obdii then you invoke the vehicles immobilisor as unauthorised access

...OBDII like many other vehicles out there these days so you'll need a tool that can plug it in and read the outlet located above the shin of your right leg under the dashboard or steering wheel. Here ...

...legend on the fuse box. they are controlled by the GEM, that is fords name for the body control module, as with most newer vehicles, you will need to have an obdII scanner to read codes and data ...

OBDII like many other vehicles out there these days so you'll need a tool that can plug in and read the outlet located above the shin of your right leg under the dashboard or steering wheel. Here is a

...read but my OBDII not scanning and I checked the fuses and they all seem to be fine. I need to pass emissions and that the only part that isnt reading. Is there another way to check this? or am I ...

...OBDII code reader came out in 1996 per government mandate. Before that time, OBDI was the first vehicles with computers, and every manufacture was doing their own thing and creating their own vehicle ...

...sprinter. i just changed the intake house and found oil in it. is this normal? i also have PO299 reading on my obdII tool. Normal to have oil in hoses, Not sure what that code is? Some scan tool ...

...OBDII scanner to be plugged into a port (typically, should be near the steering column, under the dash). older models may have OBDI (no standard location of port) scanner specific to the make of the ...

...OBDII connector. I had a helper in the passenger seat to read the instructions from the TSB to me in sequence.This is not very hard to do, and one need only be careful. It's easier to do with the ...