2000 Hyundai Elantra "10 intake torque" Questions

Ad

...intake throttle body), Use Injector Cleaner, brush out the ports but careful around the little vail, blow dry, reinstall. I tried it and it works. It is caused by a carbon build up over 10 years. I ...

Ad

...intake manifold are installed together 2B 10-12 ft. lbs. plus 60-65 degrees or 28-33 ft. lbs. 3C Step 1: Tighten the cylinder head bolts to 22 ft. lbs. 4D Step 1: Tighten the connecting rod bearing ...

Ad

...INTAKE SIDE 8 4 1 5 9 7 3 2 6 10 EXHAUST SIDE In sequence, torque the cylinder head bolts. Torque: 30 Nm (22 ft-lbs). In sequence, torque all bolts. Torque: 50 Nm (37 ft-lbs) In sequence, turn each ...

Question about Hyundai Elantra

1 Answer

...intake manifold mounting bolts/studs, torque in a crisscross pattern as follows: Step 1: Torque the bolts/studs to 44 inch lbs. (5 Nm). Step 2: Torque the bolts/studs to 83 inch lbs. (10 Nm). Hope ...

...intake plenum bolts to 88 inch. lbs. (10 Nm). Throttle body support bracket Throttle cable bracket to the cylinder head mounting bracket and the cables to the throttle body lever EGR heat shield Fuel ...

Question about Hyundai Elantra

1 Answer

...intake hose, as necessary.
Remove the rocker arm center cover.
Label and remove the spark plug wires.
Remove the breather and PCV hoses.
Remove the upper timing belt cover.
Remove the ...

Question about Hyundai Elantra

1 Answer

...intake manifold. Tighten the nuts and bolts to the specified torque. 10. Install the new exhaust manifold gasket and the exhaust manifold. Tighten the exhaust manifold attaching nuts to the specified ...

Question about Hyundai Elantra

1 Answer

...settings for manifold bolts What are the manifold bolt torque settings for intake manifold on 2000 Cadillac Deville? Check this Caddy link for torque specs. intake manifold torque sequence 10 ...

Question about Hyundai Elantra

1 Answer

...to 25 Nm (18 lb-ft). Lower intake Stage 1: Tighten to 15 Nm (11 lb-ft). Stage 2: Tighten to 32 Nm (24 lb-ft). Rocker Arms Stage 1: Tighten to 10 Nm (89 lb-in). Stage 2: Tighten to 32 Nm (24

...10 It's important to follow the torque sequence and torque specs carefully to ensure that the intake manifold is properly secured and sealed. Over-tightening or under-tightening the bolts can cause ...

Not finding what you are looking for?
2000 Hyundai Elantra Logo

1,531 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...