...install a temporary ignition switch, bridging out the existing switch, as a way of elininating it. If this doesn't reveal the fault, go right through the ignition wiring circuit. I am sure you will ...
Ignition Switch to the "On" position but DO NOT start the engine Turn Headlight "On" Turn Headlights "Off" Turn Ignition Key "Off" You may also simply disconnect the battery for at least 30 minutes to
Question about Geo Metro
install a ignition switch srs fuse. the fuse is in the FSM too. XJ jeep i found no fuse. for that. it has bags? USA car? http://www.jeepforum.com/forum/f11/1996-cherokee-airbag-753490/ battery neg lug
...ignition coil,crank position sensor,plugs,wires,cap & rotor. checked all fuses and fuel pump. not firing at ign coil Have you checked the cam sensor. It coincides with the crank sensor to tell it to ...
...ignition switch there are lots of ignition parts. did someone else take this apart? you are where? under hood , or inside steering column parts i hope the air bags are defeated, as not doing so , has ...
...to install ignition switch on 96 grand cherokee if I was going to do that i would buy a repair manual on ebay for about 10 bucks, or i would search on youtube.com for a video of someone else doing
...engine without "permission" from the vehicle. (I think the computer needs to see the actual rotation of the ignition switch) I would check and see if Jeep has a factory parts counter unit
239 questions posted
Usually answered in minutes!
239 Questions
222 Questions
197 Questions
172 Questions
151 Questions