Question about Geo Tracker
throw out bearing and pressure plate(you can purchase a clutch set)and a new collar.You don`t want to go back in and have to replace anything else.Parts store will have everthing but the colar,take it
...new I Throw on as much as I can with a breaker bar or cheater bar on a ratchet. Don't hang on it or stand on it, The bolts can break. The torque is less than a hundred foot pounds. here is the truth, ...
Question about Geo Tracker
...new clutch installed. something is wrong A noise in neutral that goes when the clutch is disengaged indicates a front input shaft bearing in the gear box . When the clutch is out that shaft is ...
...new pedal this time it stripped the gear where it hooks to the cable so i went an got another pedal an a clutch cable still impossible to i removed the transmission an noticed when the clutch engages ...
...new clutch plate, throw out bearing, pressure plate, and gear tool. and look up the torque specifications for your pressure plate to flywheel screws before putting them back in. service flywheel then ...
AKA throw-out bearing. A separate throw-out bearing is about $30, a new clutch pack is about $150. You wouldn't want to replace the bearing, and then have to do it all over again to replace the clutch
...new slave cylinder. but as it stands now the rod on the slave cylinder is fully open, pushing the throw out bearing on the plate. i have not blead it yet. my question is why is the throw out bearing ...
...1992 mazda truck the throw out bearing should pull off and slide the new one on.feel free to contack me any time .i know these truck inside and out i owen a 92 mazda 2600i 4x4 ok good luck . ...
how to fix noisy throw out bearing noisy throw out bearing Remove gearbox Fit new bearing Check clutch while you have gearbox out Renew if necessary Replace gearbox Easy! Have fun
Question about Holden Cars & Trucks
...is depressed. Advise to have new clutch plates installed along with new throw-out bearing since it's all apart anyway and just a few more dollars for the clutch plates. It's a lot of labor. Good ...
213 questions posted
Usually answered in minutes!
350 Questions
228 Questions
207 Questions
191 Questions
187 Questions