Question about Geo Storm
92 Geo storm do I have to pull the tranny to replace the slave cylinder Not normally. The clutch slave cylinder is externally mounted. Get one or the tyre chains to change it. ...
...i need to how far i need to turn the distributor You need a timing light. You hook it to the no.1 cylinder and it flashes when that cylinder sparks. Aim the light at the crank. There is a timing ...
Question about Geo Storm
spark to cylinder but appears to be dead new head does not run right ran perfect then blew head gasket i bought rebuilt head and replaced it but still doesnt run on 4th cylinder Was the same fault ...
firing order 91 geo storm Firing order - 1 - 3 - 4 - 2 Cylinder # 1 is to the left when viewing the engine from the front of the car. They are, left to right, 1 - 2 - 3 - 4. Looking from the side of ...
...lash between the rocker arm and valve stem on both the intake and exhaust valves on the number 1 cylinder, the intake valve(s) on the number 2 cylinder and the exhaust valve on the number 3 ...
what is the engine size of a '92 geo storm The Geo Storm is was equipped with a 1.6L 4 cylinder engine, the GSI Geo Storm had a 1.8L 4 cylinder engine. The Geo Storm was made by Isuzu Motors from 1990
Question about Geo Storm
...the #4 on the dist.cap, and the rest so on counterclockwise, it will start, runs rough like on two cylinders. The fuel pump is charging up like its suppose to when you turn the key. the timing is
Question about Geo Storm
I have a 1993 geo storm.it has 1.6 lt 4 cylinder 5 speed.well it jumped time.bent the valves.so I got new used head.put new timing belt,water pump & spark plugs. I installed every thing just as ...
Question about Geo Storm
1992 geo storm complete loss of power while accelerating now car will not start going 45 mph whean it just shut down. Could be fuel pump or something in the ignition system. Have you checked for spark
140 questions posted
Usually answered in minutes!
150 Questions
94 Questions
73 Questions
2 Questions