1990 Geo Metro "rail release" Questions

96 chevy camaro z28 It should be on the drivers side of the car, mounted to the inside of the frame rail just behind the driver seat. It will be a "can" shaped metal cylinder with small pipes sticking

is stuck in farthest back position and will not slide forward. Check under the seat where the guide rails are and look tovsee if the wire underneath is pulling to release both sides of the seat on the

release the pressure in the fuel injector rail through schrader valve at end of rail It could be that the fuel pressure is too high. This COULD cause the injectors to not fire when they are triggered.

...rail Where is the valve to release the fuel pressure located on the fuel rail of the 1993 Chevy cavalier (2.2) ? If you have one it looks like an A/C charge port. the rail isn't very big if you don't ...

...release the fuelinjector pressure on a 1994 chrysler labaron Along the fuel rail will be what looks like a tire stem same as on a wheel remove the cap and use a small nail or screw driver to release ...

...VTS front seats are jammed in back position ! How to release ? There is no pennys or anything at rails .I tryed with force but locking system wont move. Usually something in the rails blocking ...

...rail on a 1998 fordf f 150 You will need to release fuel pressure.were the two fuel lines come up will be disconnect to fuel rail two different sizes remove .look at fuel rail you will see mounting ...

...problem is the slides that the seat is attached to. The slides are apparently installed with the rails in one piece and cannot be removed from it without violence. Once the bench seat is removed ...

...release valve on the fuel rail and there is still no pressure in the fuel rail. The only time that it does start is with starting fluid and then it stalls. What should we do now? BAD FUEL ...

98 Camaro 3800 II v-6 auto trans. Fuel rail will NOT pull free from manifold or injectors. I have removed four hold down nuts, fuel lines etc. It appears to be the rear of the rail that is not ...