1994 Eagle Talon "slave cylinder" Questions

Ad

Question about Eagle Talon

1 Answer

...slave cylinder, and clutch master cylinder were all installed but when i push the clutch pedal down it still doesnt engage the clutch all the way, it acts like it is getting a little pressure but not ...

Ad

brakes, the bleeder is located on the slave cylinder i believe Its not linkage.. its a hydrolic clutch. I had my pedal go out one time, but it was a slave cylinder. Check your master, slave and fluids

Ad

...slave cylinder it to blame, see if you can find it and any leaks. also you have to pump the clutch a few times befor it starts working right this may help. also you might have air in the lines now so ...

...this.. this could be a couple of issues, have you noticed low clutch fluid on your clutch master cylinder? this could be a slave cylinder, master cylinder or it could even be a weakend pressure

Question about Eagle Talon

1 Answer

...when you try to put the car in gear. Right now it is kinda wide open to the problem it could be an issue with the clutch, master cylinder, slave cylinder, or the syncros in the transmission

Question about Eagle Talon

2 Answers

slave cylinder and master slave wont go in gear, and when in gear and pressing clutch vehicle wants to go You may not have got all of the air out of the clutch line Try bleeding it again. The sequence

slave cylinder which attaches to the bell housing. This unit has the same internal piston set up as the master. It actuates the clutch fork. Look for fluid in the rubber boot the pushrod comes out of.

...slave cylinder, or the line between the master cylinder and the slave cylinder is broken ,rubbed through, or punctured. Most likely it is the slave cylinder and will need to be replaced. You need to ...

...slave cylinder my master cylinder clutch and pressue plate and i got all the air out of the lines and it still grinds like the clutch in not ingadgeing all the way With a helper pushing clutch pedal, ...

Question about Eagle Talon

3 Answers

clutch wont disengage there might be several reason for this, first check clutch slave and master cylinders, then check clutch disk for wear and tear use. hope i helped i can"t find the dipstick on my

Not finding what you are looking for?
1994 Eagle Talon Logo

93 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Eagle Talon
1995 Eagle Talon

284 Questions

1991 Eagle Talon
1991 Eagle Talon

144 Questions

1993 Eagle Talon
1993 Eagle Talon

121 Questions

1992 Eagle Talon
1992 Eagle Talon

119 Questions

1997 Eagle Talon
1997 Eagle Talon

74 Questions

Top Eagle Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

john h

Level 3 Expert

29494 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...