2002 Saturn S-Series "sl idle problems" Questions

...idle change if there is a leak. I had gasket replaced for $450 and car runs like new. My car is a 2000 saturn SL 1 with 60000 miles on it. Hope this helps someone. The intake gasket is know to "fold" ...

...sl, it start and shut off by itself. someone said it might be the sensor problem. sometimes engine light comes on but oes by itself havit scanned today -----hav u done a major tuneup--throttle body ...

...SL code showing high idle misfire cyl,1 egr valve I have replaced the ignition coils hoping that would stop the misfire and high idle though it does seem to run a bit smoother still has high idle and ...

...idle be attributed to Cam Position Switch ? If so, where is that switch located? No, its the intake manifold gasket. This is a very common problem with the SL/SL1 engine. There are only three bolts ...

...SL idle too fast 2500 I have replaced the idle control valve and the throttle postition censor and it still idles at 2500, it's a 5 speed manual transmission. What else could it be? more than likely ...

idle problem engine idles at high rpm all the time You have a vacuum leak somewhere temperature sensor on the side of the block, had the same problem

MY CAR IDLES VERY HIGH, THEN LOW, THEN HIGH AND ROUGHLY.WHERE IS THE IDLE ADJUSTMENT LOCATED? There is no idle adjustment. The idle is computer controlled. It does sound like you have a vacuum leak. ...

sl for $350 the problem is it starts but dont idle what could be the problem? i want to see if its something serious before i buy it. I have one, so here you go-check compression, if it's good (should

...SL 300 i have replaced both fuel pumps,persure regulater, plate senor, and it idles great but press the pedel it bogs and i let up it's runs great but it keeps boging hello there Sounds like the MAF ...

Engine idles at 2400 rpm: My 1.9 liter SOC engine idle too high, at 2400 rpm. I replace the idler control value, as well as clean the throttle assemby and throttle body (both were caked with carbon). ...