2001 Saturn S-Series "compression problems" Questions

...problems.One mechanic told me it was a dead cylinder and the engine needs to be changed. Can anyone help? Do this sound like a problem anyone else has had? scan check egr valve make sure its working. ...

2002 1.9 sohc mp efi missing badly on #1 cylinder. new plug .wires,fuel filter.compression good.check engine light been on for several months showing egr fault. cleaned no help.installed another no ...

98 honda accord v6 only has 90 psi compression 90 psi compression is the minumun for gas engine to ignite, you have low compression what is the compression next to it? The compression on Honda V6 is ...

...and they are telling me is a problem with the headgasket. If the gas is being pushed out on the compression stroke maybe but it sounds off to me. If you have the vehicle back do a cold

...have low pressure what can i do? replaced the spark plugs, the wires and the coil pak If cylinder compression is too low, the car may not even start because of it. Have a shop do a compression test ...

...problems my 99 ranger idles rough and has no compression replaced tps and fuel filter along with sparkplugs starts but wont go past 30 mph looses rpms and stalls cant get a pocketscan to lightup and ...

number 1 Cylinder loses Compression Hi, That means u have to replace the piston ring on that piston in the #1 cylinder or check the intake/exhaust valve, it might have problem in sealing the cylinder ...

what is the compression for each cylinder for dihatsu charade 3 cyl 1986 most petrol engine run 145psi ( low compression engines) to around 165 psi (high compression engines) regardless of the ...

...Compression test results are good then do a full tune up even replace coil packs or distributor ( which ever is applicable) and replace fuel filter. These vehicles are not known for major engine ...

no compression in cylinder 2 mk 4 golf gti car is running but then it splurters when driving checked leads etc and then cylinder no 2 shows low compression so where or what is the problem If you are ...