2000 Saturn L-Series "replace blower motor switch" Questions

...blower motor resistor. Well, the heater quit again with the same symptoms as before...intermittance...sometimes it would work on all settings, sometimes not at all and would come on or tirn off as I ...

...blower and no other speeds, the resistor card is under the passenger side glove box by the center console way up there, i think its a phillips head,if i remeber right not too hard to get to,,, if no ...

...switch don't feel good and would like to fix it if possible. Check for power at the blower motor first. If you have power the motor needs to be replaced. If no power then check the power at the ...

replace heater fan fan keeps shutting off Autozone.com has instructions. Go to the site, register your vehicle, it's all free. In the parts search box, type in blower motor, hit go. Then right side of

replace it if burned. This will probably leave the fan on again, if it was burned. Next, pull the relay out of the socket in the interior fuse box--the fan should stop. Push the relay back in--does it

...blower motor will draw. If you pop the top off your switch (there are 3 or 4 tabs which hold it together) and inspect inside (be very careful - there are spring-loaded brush contacts and a ...

...replace the blower motor or switch If the Blower Motor does not operate on any speed, the blower resistor is most likely NOT the problem. To find out if it is the blower motr or the switch, test for ...

...blower motor has stopped working. I have replaced the blower motor and the resistor with brand new parts but the fan still does not work. When I turn the fan on the blower motor relay clicks but ...

...Replace the blower motor relay. Is the replacement complete? -- Go to HVAC Blower Controls System Check -- Classic blower circuit supplies power to the motor and everything else is on the "earthy" ...

...may also need to replace the blower motor resistor. If still the problem persists, then you need to replace the blower motor. Please do rate the solution and revert for further assistance. Thanks ...