1998 Saturn SC "remove head" Questions

...remove cylinder head with thermostat runs about $150.00. Head mechine ( check for cracks and milled ) $145.00. Labor time to remove and reinstall cylinder head 8.5 hrs X shops labor rate. 1.9L DOHC - ...

...remove the head myself to check the head and block. If it is only a gasket put it in and reinstall the head. If it's worse to scrap the car. I don't find the question. What you say sounds like a ...

remove the head carefully a look for a bad spot on the gasket. Even if you find one, have the head tested for a crack before installing with a new gasket. Please let me know if you have questions, and

head gasket. It could also be just worn out. The easiest way to confirm that this is the problem is a cylinder compression test. You can buy a compression tester at Sears and auto parts retailers like

...remove the Valve Cover. There are 2 small "Star" indentations in the top of large round discs - these are actually screws. Although the screws SHOULD screw out using a star driver - that hardly ever ...

.... also car is turning off while driving(main issue) no gauge/hazard/headlights.will not restart!!! removed battery for bench test(only 2mo old) has full charge. installed it and hasnt done it ...

My Saturn recently begin to register as running hot and I remove the thermostat housing only to find out that there were no thermostat in my car. I purchased one but I am not cerytain that I should ...

head. remove sensor and check or cracks. also check connector for corrosion. if cracked, go to dealer for replacment. they eill sell you a new designed metal sensor to replace your cracked plastic one

...cleaned as much of the intake manifold and throttle as I could with throttle body and MAP sensor removed, using cleaner, brushes and rags. Ran HEET and fuel injector cleaner. I can abide the lack ...

how do i replace a ignition switch in a saturn sc2 Takes hammer and small long chisle or puch to back out two screws that have heads sheered.This removes assembly then has two 5.5mm screws retaining ...